4.0 Automated and Robotic Bending and Shearing Lines
Introducing our state-of-the-art 4.0 Automated and Robotic Bending and Shearing Lines. We are a factory using cutting-edge technology for superior precision and efficiency.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
4.0 automated and robotic bending and shearing lin
Type
Press Brake
Transport Package
Wooden Case
Specification
5200x2100x1560mm
Trademark
Prima
Origin
Nanjing, China
HS Code
8456901000
Production Capacity
25

Product Description

Made in China cnc bending machine Amada design Hydraulic press brake for stainless steel bending Robotic Bending Cell System for Automatic robot press brake of sheet metal  Robotic Press Brake Bending Cell Automatic bending machine cell , Automatic bender machine 4.0 automated and robotic bending and shearing lines
4.0 Automated and Robotic Bending and Shearing Lines
4.0 Automated and Robotic Bending and Shearing Lines
4.0 Automated and Robotic Bending and Shearing Lines


Product introduction
The Whole Structure of Press Brake:
Totally European design, streamlined looking
Taking off inner-stress of welded parts by tempering, good stability
Remove rust with sand-blast and coated with anti-rust paint
Adopt Spanish pentahedron machine center, once clamping can finish all working surfaces which will
guarantee dimension precision and position precision.
The design of the machine frame is a critical part of any machine with relation to its ability to produce  accurate parts for a long period of time.
Frames, assembly surfaces and connection holes are machined after the welding process, up to 60' in a single pass.
Supplying three front sheet supports , Finish of Nippon Polyurethane paint. Robotic Press Brake Bending Cell

The Whole Structure of Press Brake:
Totally European design, streamlined looking
Taking off inner-stress of welded parts by tempering, good stability
Remove rust with sand-blast and coated with anti-rust paint
Frames, assembly surfaces and connection holes are machined after the welding process, up to 60' in a single pass.
Supplying three front sheet supports , Finish of Nippon Polyurethane paint Automatic bending machine cell , Automatic bender machine
2) Ram structure:
Upper stroke design for bending, low noise, stable operating situation , Parallel tolerance of Y1 and Y2 is 0.01mm
Y1,Y2 can be programmed separately can work under non-balance load, can bend cone-shape work piece
At bottom dead center a pressure-keeping time is offered, and can be programmed to assure precision of all kinds of work piece. Can move the ram up slowly, which allows the operator to control work piece conveniently Universal fixing-surface of the upper tool can be meeting with the clamping requirement of the tool farthest!
Hydraulic system:  
Close loop electro-hydraulic synchronized servo-control system, the most advanced
Hydraulic system is from Rexroth, Germany, a full loop electric-hydraulic proportional servo control, Sumitomo oil pump, Japan.
Imported linear optical reader, guiding system, positioning system and hydraulic balancing system with
high precision, which all can permit the processing work piece of full length or with eccentric.
An outfit with "C" is at throat, as deformation compensation on throat, directly measuring the distance
between upper tool and low die, assuring the precision of work piece.
All seals in cylinder is imported, the most famous brand, good quality and high performance
Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level
can be read or seen directly
Being able to work under rated load continuously, stable working and high precision
4) CNC Back gauge:
Close loop electro-hydraulic synchronized servo-control system,the most advanced
Good for work piece needing multiple steps of bending with high precision requirement.
X is moved with ball screw,guided by linear guide,and driven by digital AC servo-motor.
Back gauge has well enough mechanical strength and rigidity with tank-type gauge structure.
Two fingers are moving alone swallow guide,operate easily with high precision
Particular finger-stop design,enlarge the range of back gauge. 4.0 automated and robotic bending and shearing lines

Attachment with the machine& Machine key components list
No. 1 years spares Remark   Name Origin
1- Grease gun& foot switch Free of charge   Asynchronous motor Siemens, Germany
2- Keys to button lock and electric cabinet lock FOC   Controller Delem DA52, Holland
3- Foundation bolts FOC   Transformer SCHNEIDER
4- O-type sealing rings FOC   AC contactor SCHNEIDER
5- Combined washers FOC   Circuit Breakers SCHNEIDER
6- Mobile type foot switch   Servo motor Estun
7- Operation & maintenance manual In English   Gear pump Siemens pump
8- Electrical diagram In English   Sealing parts Valqua ,Japan
9- Operation Instruction ENGLISH
Operation Instruction(Machine)
Packing list, Instruction of System
Certificates of quality		   Hydraulic Integrated Systems Bosch, Germany,
  Quick release China Shanghai

Detailed Photos: 
4.0 Automated and Robotic Bending and Shearing Lines
4.0 Automated and Robotic Bending and Shearing Lines
4.0 Automated and Robotic Bending and Shearing Lines
4.0 Automated and Robotic Bending and Shearing Lines
Technical specifications:
No Model Pressure
KN		 Bending
Leng (mm)		 Columns
Distance (mm)		 Open 
Height (mm)		 Throat
Depth (mm)		 Slide
Stroke (mm)		 Motor
Power (kw)		 Machine
Size (mm)
1 40T/2500 400 2500 1900 210 200 110 4 2600x1270x1980
2 63T/2500 630 2500 1900 235 250 120 5.5 2600x1360x2050
3 63T/3200 630 3200 2600 235 250 120 5.5 3300x1360x2050
4 80T/2500 800 2500 1900 320 320 150 7.5 2600x1400x2380
5 80T/3200 800 3200 2600 320 320 150 7.5 3300x1400x2380
6 80T/4000 800 4000 3100 320 320 150 7.5 4100x1400x2380
7 100T/2500 1000 2500 1900 330 320 150 7.5 2600x1400x2380
8 100T/3200 1000 3200 2600 330 320 150 7.5 3300x1400x2380
9 100T/4000 1000 4000 3100 330 320 150 7.5 4100x1400x2380
10 100T/5000 1000 5000 4100 330 320 150 7.5 5100x1400x2380
11 125T/2500 1250 2500 1900 330 320 150 7.5 2600x1400x2380
12 125T/3200 1250 3200 2600 330 320 150 7.5 3300x1400x2380
13 125T/4000 1250 4000 3100 330 320 150 7.5 4100x1400x2380
14 125T/5000 1250 5000 4100 330 320 150 7.5 5100x1400x2380
15 160T/2500 1600 2500 1900 400 320 200 11 2600x1550x2580
16 160T/3200 1600 3200 2600 400 320 200 11 3300x1550x2580
17 160T/4000 1600 4000 3100 400 320 200 11 4100x1550x2580
18 160T/5000 1600 5000 4100 400 320 200 11 5100x1550x2580
19 160T/6000 1600 6000 4800 400 320 200 11 6100x1550x2580
20 200T/2500 2000 2500 1900 435 320 200 15 2600x1650x2900
21 200T/3200 2000 3200 2600 435 320 200 15 3300x1650x2900
22 200T/4000 2000 4000 3100 435 320 200 15 4100x1650x2900
23 200T/5000 2000 5000 4100 435 320 200 15 5100x1650x2900
24 200T/6000 2000 6000 4800 435 320 200 15 6100x1650x2900
25 250T/2500 2500 2500 1900 435 320 200 18.5 2600x1750x3070
26 250T/3200 2500 3200 2600 435 320 200 18.5 3300x1750x3070
27 250T/4000 2500 4000 3100 435 320 200 18.5 4100x1750x3070
28 250T/5000 2500 5000 4100 435 320 200 18.5 5100x1750x3070
29 250T/6000 2500 6000 4800 435 320 200 18.5 6100x1750x3070
30 300T/3200 3000 3200 2600 435 350 200 22 3300x1850x3285
31 300T/4000 3000 4000 3100 435 350 200 22 4100x1850x3285
32 300T/5000 3000 5000 4100 435 350 200 22 5100x1850x3285
33 300T/6000 3000 6000 4800 435 350 200 22 6100x1850x3285
34 400T/3200 4000 3200 2600 520 400 250 37 3300x2000x3230
35 400T/4000 4000 4000 3100 520 400 250 37 4100x2000x3230
36 400T/5000 4000 5000 4100 520 400 250 37 5100x2000x3230
37 400T/6000 4000 6000 4800 520 400 250 37 6100x2000x3230
38 400T/7000 4000 7000 5600 520 400 250 37 7100x2000x3230
39 500T/4000 5000 4000 3100 600 400 300 45 4100x2400x3710
40 500T/5000 5000 5000 4100 600 400 300 45 5100x2400x3710
41 500T/6000 5000 6000 4800 600 400 300 45 6100x2400x3710
42 500T/7000 5000 7000 5600 600 400 300 45 7100x2400x3710
43 500T/8000 5000 8000 6200 600 400 300 45 8100x2400x3710
44 600T/4000 6000 4000 3100 600 400 300 45 4100x2650x3750
45 600T/5000 6000 5000 4100 600 400 300 45 5100x2650x3750
46 600T/6000 6000 6000 4800 600 400 300 45 6100x2650x3750
47 600T/7000 6000 7000 5600 600 400 300 45 7100x2650x3750
48 600T/8000 6000 8000 6200 600 400 300 45 8100x2650x3750
49 700T/4000 4000 4000 3100 640 500 300 55 4100x2850x3970
50 700T/5000 5000 5000 4100 640 500 300 55 5100x2850x3970
51 700T/6000 6000 6000 4800 640 500 300 55 6100x2850x3970
52 700T/7000 7000 7000 5600 640 500 300 55 7100x2850x3970
53 700T/8000 7000 8000 6200 640 500 300 55 8100x2850x3970
54 800T/4000 8000 4000 3100 800 500 400 2x37 4100x3200x4400
55 800T/5000 8000 5000 4100 800 500 400 2x37 5100x3200x4400
56 800T/6000 8000 6000 4800 800 500 400 2x37 6100x3200x4400
57 800T/7000 8000 7000 5600 800 500 400 2x37 7100x3200x4400
58 800T/8000 8000 8000 6200 800 500 400 2x37 8100x3200x4400
59 1000T/5000 10000 5000 4100 800 600 400 2x45 5100x3500x4950
60 1000T/6000 10000 6000 4800 800 600 400 2x45 6100x3500x4950
61 1000T/7000 10000 7000 5600 800 600 400 2x45 7100x3500x4950
62 1000T/8000 10000 8000 6200 800 600 400 2x45 8100x3500x4950
63 1200T/5000 12000 5000 4100 900 600 400 2x45 5100x3800x5200
64 1200T/6000 12000 6000 4800 900 600 400 2x45 6100x3800x5200
65 1200T/7000 12000 7000 5600 900 600 400 2x45 7100x3800x5200
66 1200T/8000 12000 8000 6200 900 600 400 2x55 8100x3800x5200

About Prima Factory:  High performance Automatic bending cell cnc press brake with Robot 
Nanjing Prima CNC Machinery Co., Ltd. is located in the center of China's machine tool industry, Mingjue Industrial Park , Shiqiu Town, Lishui Zone, Nanjing  Our company specializes in Table type CNC Fiber Laser cutting machine, exchangeable table cnc fiber laser cutting machine, press brake, shearing machine , ironworker, punching machine , HVAC ducting machine and other metal forming forging equipment development and sales, our product positioning in the middle-top quality class. We commit a modern enterprise management methods, committed management and meticulous management and zero defect operation. Based on the quality of the product management, its excellent quality, innovative design, reasonable price, and improve after-sales service to win the majority of Chinese and foreign customers praise. Primapress Brand sheet metal processing equipment. Widely used in automobile manufacturing, communications, computers and so on. Prima CNC insist on leading technology strategy, positioning in the "do-class machine, a first-class brand," the high level of long-term sales of CNC machine tools in the process, not only to cultivate a number of series of numerical control products, while cultivating a group of skilled, practical style of high-quality workforce. Enterprises have their own research and development institutions, with the domestic strong product research and development of skills. Primapress specializes in the export business, our company already has CE certification and have one international after-sales team , Our machines are widely exported to Southeast Asia, EU, USA , South America, the Middle East and other markets around 100 nations with good quality, suitable price, comprehensive after-sales service, was widely welcomed by customers and unanimously approved. Our company ambition is "build quality brand, do excellent machine",it is also the company's entrepreneurial spirit and look forward to domestic and overseas friends to visit. 

4.0 Automated and Robotic Bending and Shearing Lines

FAQ: 

 Q1. Trade company or manufacturer?

A: We manufacturer

Q2. Is it easy to operate for the new user ?
A: very easy 

Q3. What should I do when the machine is in trouble? 
A: Take photos and videos and contact our sales at once.   

Q4: How long does it take to learn how to operate a laser cutting machine?
A: A couple of hours 

Q5: Is it harmful to human body when in operation ?
A: no,very safe.

Hot Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours